At-berth CO2 from the auxiliary engines of cargo ships in all Finnish ports and 19 Norwegian ports, estimated call by call from open national port-call registers with the method published for Porto do Itaqui (Cunha et al., 2026, Case Studies on Transport Policy). Preliminary results, November 2026.
kt CO2, auxiliary engines, cargo segments, stays of 1 to 240 h
LMDI decomposition, tonnes CO2 attributed to each driver
kt CO2 2019 to 2025 by port, with share of the national total
Reduction of auxiliary-engine CO2 if every call connected, with the national grid factor of each year
kt CO2 at the 20 berths with the highest totals; Finland records a berth code on every call
Share of CO2 against share of calls, 2019 to 2025
From 2030, FuelEU Maritime requires container and passenger ships above 5,000 GT to use shore power when they stay more than two hours at berth in the main EU ports, and the Alternative Fuels Infrastructure Regulation requires those ports to provide it. Adding ferries, ro-pax and cruise ships to the inventory shows how much of the at-berth CO2 that rule would reach: about in Finland and in the 19 Norwegian ports.
Share of auxiliary-engine CO2 at berth, cargo and passenger ships, 2019 to 2025
The same method gives two different stories. In Finland cargo calls fell 28% between 2019 and 2025 but CO2 fell only 9%, because each call grew longer and ships grew larger; berths hold half of the total, and the oil berth at Sköldvik alone holds 12%. In Norway CO2 fell 6% as calls declined, Mongstad alone accounts for almost a third of the 19-port total, and the near-zero-carbon grid makes shore power remove 97 to 99% of auxiliary-engine CO2. In both, liquid bulk and general cargo dominate the cargo total, which the 2030 obligation does not reach.
CO2 = auxiliary power at berth (IMO Fourth GHG Study, by segment and DWT class) × hours alongside × SFOC (185 g/kWh, MGO) × 3.206 g CO2/g fuel. Auxiliary boilers are excluded, so totals are a lower bound for tankers. Stays shorter than 1 h or longer than 240 h are removed as recording artefacts or lay-ups. Stays that the Finnish register records at anchorage (port area "ANK") are not berth calls and are excluded. Shore-power scenarios use each year's national grid factor (Statistics Finland table 14qt; NVE climate declaration, Norway) and 97% transmission efficiency; the Finnish factor for 2025 is not yet published, so 2025 uses the 2024 value; they are a technical ceiling, not a forecast. Finnish DWT missing in the register (about % of calls) was imputed from gross tonnage by segment. The main inventory covers cargo ships; passenger ships enter only in the section on the 2030 obligation, and offshore, fishing and service vessels are outside both.
Finland: Fintraffic Digitraffic port-call API (CC BY 4.0), 219,410 calls with IMO, berth, ATA and ATD; vessel register with GT, DWT and engine power. Norway: Kystverket Kystdatahuset API (open), 211,965 calls in 19 ports with GT and DWT. Downloaded 9 November 2026; passenger extension and audit of the series on 10 November 2026. Code and derived tables on request; the method is the one described in the Itaqui paper and in the open Python library maritimeco2.